• Eλληνικά
  • English
» Login
στείλτε VIBER τηλ.6944340728  Messenger   e-mail: 323582@gmail.com  
 
      
  
ζητήστε κωδικό
εισόδου
Ευχαριστούμε

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

SERVICE Sp problem Trouble arrow Photos βλάβες+ arrow Unknown photo troubles arrow Triumph Adler DC 2230 error code CFB31 utax CD1240



Triumph Adler DC 2230 error code CFB31 utax CD1240
 
Price per Unit (τεμ.): Offer a price you like

Adler DC 2230 error code CFB31

cfb31 error utax 1240,  update new version,

or CB off  xxx operation panel

2230 CFB31program Loading

Question KM5050 error code CFB31. Not in manual

Machine will not boot up, just goes to blue screen and displays CFB31 error. There is nothing in the service manual or on the website about this.

Not Much but will point you in the right direction

According to my info this is a communication problem between the Panel PCB (don't know which one) and the controller PCB (I suppose this the main PCB - Difficult to say because i have the info in German and have to translate). Symptoms are as you said a blue, or black screen. Possible source of fault is Panel PCB, controller PCB, or connection cable

what I did

I just replace the main PWB and hard drive from a different machine.. it now boots up but goes into a CFB30 error code.. but at least I got rid of the blue screen!!! is it possible that this error is because the machine I borrowed the board from is a 5050?

CFB30 related to CFB31

My info Gives the same symptoms for this code as for CFB31. but instead of communication error between panel PCB and controller PCB, says it is only comm. error with controller PCB.
 First thing to try is to change the Dimms there is a set under the ops panel, and a one in the main board, you MUST change them as a pair. If thats no good swap the ops panel complete but remember to swap the dimms in the panel so you keep the same pair on the machine.

Good Luck.

Let us know how you get on............
 

Smile that was it!

I had taken the board out of the 5050 to see if that was the problem and I still got the error. I brought the op panel over from the 5050 and the error went away. So it was the fact that I didnt have all the original dimms together.

THANKS!!!
The firmware was at different levels. All you needed to do was reload firmware to the latest v. 2.05A. The date that shows on the Configuration Report is 1/28/08.

=^..^= 
 

Talking cool!!

thanks for the firmware advice.. I always use firmware as a repair tool!
 I had a 3050 that triggered a CFB31 code only when it the network cable was plugged in. Disconnect it, reboot the machine, everything works. Plug it back in, reboot, CFB31. Turns out the other end of the network cable was plugged into a switch which had another network cable with BOTH ENDS plugged into the switch creating a loop. Connected everything the right way, code went away.
 

List of CF CODE

Hello,

Here is a list of codes for KM 5050/4050/3050

Thanks

PS : The list is on the Technical Bulletin 23 (TB23)
Attached Files

 Hello everybody! i have trouble with CFB31 in KM 3050 Triumph-Adler DC 2230 EU. can you help me? Thanks in advance! send at >> copys10@gmail.com
:quest:

 I don't have any km3050, but my info is there is a communications problem with the panel pcb. Your may try swaping the dimm with a good machine, but remember to keep the dimms in pairs - you cannot mix the dimm chips. possible firmware update. Otherwise try replacing the panel hopefully you have a good test machine, whole panel $i600+, panel pcb is $600+

Added note just recently went to acquire some KM3050 machines and found that of approx 10 machines 25% had panel problems.

 



 Email

8/16/2011
14:43:13
Subject: CS 4050 error code CFB31
IP: Logged

Message:
has anyone seen this its not in the book. the only thing that i did was swap feeders. the one on this machine had some string feeding issues even after new tires and sep torque limiter, so i brought it in to test and check further but as soon as i put it on the machine cfb31(well to be honest it takes several minutes the sys software never loads and only after the fuser comes to temp does it code.

Any ideas

Scott


sbaker

 Email

8/16/2011
15:01:22
RE: CS 4050 error code CFB31
IP: Logged

Message:
never mind firmware update cured it


MR Bill

 Email

8/16/2011
16:35:21
RE: CS 4050 error code CFB31
IP: Logged

Message:
These machines have lots of little firmware chips and they are matched to the options. I tryed to swap the operator panel and got a code just like that. FYI.

2012-05-26 


Availability

This product is currently not available.
Usually ships in:

14d.gif


Last Updated: