Kyocera KM 3530 error C 4010, DC2035

 Kyocera ΚΜ 3530 polygon scanner motor used

Περισσότερα

Polygon motor steady-state problem
• The polygon motor rotation is not stable
for 600 ms after the polygon motor
rotation has been stabilized.

Poor contact in
the polygon motor
connector terminals.
Defective polygon
motor.
Defective power
source PCB.
Defective main
PCB.

Reinsert the connector. Also check for continuity
within the connector cable. If none,
remedy or replace the cable.
Replace the LSU (see page 1-6-20).
Check if 24 V DC is supplied to CN2-1 on
the main PCB. If not, replace the power
source PCB.
Check if 24 V DC is output from CN8-10 on
the main PCB. If not, replace the main
PCB.

C6000

Broken fixing heater wire
• The fixing temperature does not increase
for 40 s after the fixing heaters
have been turned on for warming up.
• The fixing temperature remains below
50 °C/122 °F for 10 s continuously
after the fixing heaters have been
turned on during stabilization.

C6020

Availability In Stock: 1 Usually ships in: