SERVICE Sp problem Trouble Sc Error +RESET problem Kyocera KM 3530 error 4010, DC2035
|
Kyocera KM 3530 error C 4010, DC2035 Kyocera ΚΜ 3530 polygon scanner motor used Polygon motor steady-state problem • The polygon motor rotation is not stable for 600 ms after the polygon motor rotation has been stabilized. Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective power source PCB. Defective main PCB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the LSU (see page 1-6-20). Check if 24 V DC is supplied to CN2-1 on the main PCB. If not, replace the power source PCB. Check if 24 V DC is output from CN8-10 on the main PCB. If not, replace the main PCB. C6000 Broken fixing heater wire • The fixing temperature does not increase for 40 s after the fixing heaters have been turned on for warming up. • The fixing temperature remains below 50 °C/122 °F for 10 s continuously after the fixing heaters have been turned on during stabilization. C6020 Abnormally high fixing unit thermistor temperature • The fixing temperature exceeds 230 °C/446 °F for 10 s. 110@
Availability In Stock: 1
Usually ships in:
|
|
Last Updated: