Develop INEO + 251, touch PANEL DISPLAY, +Help!, Konica Minolta BIZHUB c252
255mm x 91mm 4pin
Touch Panel - Non Returnable - Genuine Konica Minolta Part
OEM PART #: Konica Minolta 4037780701, 4037-7807-01
PR ORDER #: B#1489
FOR USE IN MODELS: Konica Minolta bizhub C250, Konica Minolta bizhub C252,
Konica Minolta bizhub C300, Konica Minolta bizhub C351, Konica Minolta bizhub C352,
Konica Minolta bizhub C450
INEO + 251 | EU | Develop | INEO + 251 P | EU |
. | Oce | CS 172 P | WW |
. | Oce | CS 172 | WW |
. | Olivetti Lexikon | D-COLOR MF 25 PLUS | EU |
. | Konica Minolta | BIZHUB C 252 P | WW |
. | Konica Minolta | BIZHUB C 252 | WW |
. | NEC | IT 25 C3 | WW |
...................info........
αν δεν λειτουργει καθολου η οθονη, μπορειτε να κανετε τα εξης ...
κλειστε και ανοιξτε τον πανω δεξια διακοπτη, οποτε χανει... τις σταλμενες εκτυπωσεις...
και στειλτε συγκεκριμενη εκτυπωση...απο Ιδιοτητες....
η βαλτε .... στον Αυτοματο τροφ. πρωτοτυπο για φωτοτυπια οπου θα επιλεξει Μονο του το μεγεθος
C250 control panel
Hi guys,
Just a little question for you.
I have just come in to possesion of a C250. It warms up ok and everything looks fine.
However, the touch panel section of the control panel will not accept any inputs. All the 'hard buttons' work, it's just the 'soft buttons' on the touch panel that will not respond.
I've been told, that because the machine was left on a van overnight and it got cold, that the control panel should spring back into life when it warms up. I've never heard of that before, thus the question to you guys.
I've tried recalibrating the panel via the accessability button, but the panel won't accept when I touch the 4 crosses.
I've been given 24 hours to accept or reject the machine.
Any ideas ?
c 250
do a reset trouble
hold the key utility meter and turn the machine
hello laky
How can you do a trouble reset if the touch panel is not working?!
Drum, Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com
Drum and Toner Chip Reset - http://www.chipreset.eu
Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu
c 250
the truble not reset uses the touch panel, but the key utilities' meter and the ignition key.
laky
I tried the 'hold utility while turning on' idea earlier. But the machine then wants me to press ok on the non functioning touch panel.
You might try removing the op panel and make sure the
4 pin ribbon cable for the touch glass hasn't come loose.
If that's not the case I agree, replace the touch glass.
There is cable that comes out near the MFP board only to plug into the MFP board externally. This cable connects the print engine to the scanner.
Try removing that cable, check for bent pins and then reconnect. I have had trouble with these cables after a machine has been moved and the connector doesn't make proper contact.
I managed to borrow a control panel from another dealer. Fitted it, works fine.
I have checked out all the pins/ribbon cables as suggested, but they all look fine. I guess it's just a case of the 'glass section' going faulty.
Thanks for all your help
not the same
For the Konica 7075, 7155, Minolta DI551. 21,5x80cm, as view [250x100 all]
and for the c250 display operation panel ???
6 4038 6059 02 CONTROL PANEL ASSY H I 1
6 4038 6052 02 CONTROL PANEL ASSY B,D1,D3,F1,F2,G1,G2,I,K I 1
6 4038 6053 02 CONTROL PANEL ASSY C I 1
6 4038 6051 02 CONTROL PANEL ASSY
110@ 2012-08-22pre570$1,7