• Eλληνικά
  • English
» Login
στείλτε VIBER τηλ.6944340728  Messenger   e-mail: 323582@gmail.com  
 
      
  
ζητήστε κωδικό
εισόδου
Ευχαριστούμε

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

SERVICE Sp problem Trouble arrow Sc Error +RESET problem arrow Konica c250 c252 Malfunction detected c2557



Konica c250 c252 Malfunction detected c2557
 
Price per Unit (τεμ.): Offer a price you like

 Konica c250 c252 Malfunction detected c2557

BLACK TONER END

Konica-Minolta bizhub C252

Error Code:
  • Code: C2557
  • Description: Abnormally low toner density detected
  •  Black TCR Sensor
    • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
  • Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty 3 M7 operation check PWB-M CNDM3-10 to 13 C-21 4 Reinstall Imaging Unit. 5 Change Imaging Unit /K. 6 Change PWB-M. 7 Change PWB-MFP.
 
 
 
 
 
 
2022-01-24 

darck_teck 18 Solutions November 10, 2009

ok il start by saying that my english is veryyyy bad.
ok so the developer is guarantied for 80000 copies but i seen 200k with a new dev. (developer type dv310) after some of the developer is lost in the copying proses the ac-dc sensor detects that the concentration is rong and it shows the C2557 error thats wen the error is shown by the copier .

solving it is simple you can replace the dev. and run F8 mode if it dosent work manually ajust the acdc to a lower value (lower value means that is les tonner in the dev. hyer value more tonner obviously ) , 0r leave the old dev. in it and ajut the acdc to about 180 (you can ajust to 180 take out the tonner botle make some black copies(30) and put back the tonner bottle and adjust to a lower value that works) .

The problem can also apear if the copier docent supply tonner so check that first .

Entering the service menu is simple pres utility > (toch screen) original size> (kepad) stop>0>0>stop>0>1 the password from the manufacturer is 00000000 , in the service menu select tech mode in ther yowl find the different start modes F8,F... ,

and you have printer select printer and acdc adjustment ,

pres C to clear the value and via keypad enter the desired value .

THE REST IS UP TU YOU MY FRIEND . CAUTION IF YOU DONT HAVE ANY IDEA ABOUT A LASER COPIER DONT

EVEN ENTER THE SERVICE MODE CAUSE YOU CAN DO MENY WRONGS IN THE COPIER . GOOD LUCK

 

 

joee_40 2 solutions Nov 27, 2008

This is a problem whit the black toner make sure there is toner left and that the cartrigde opens when you insert it in the copier. try to remove the tape covering the tonerpipe on the backside of the toner cartridge.

 

2012-11-17 


Availability

In Stock: 2

Usually ships in:

14d.gif


Last Updated: