w2400 A045  PAPER JAM ROLLS,  and SC508-00  Gestetner

only bypass feed ...when an error occures, with automatic rolls....or cutter

PAPER JAM ROLLS,   AND   SC508-00

 508 D Cutter Error
The left and right cutter HP
sensors stayed on or off more
than 2 seconds.
• Check the connections of the HP
sensors on the left and right side.
• Replace the HP sensors.
Temporary Solution
To use the machine until it is repaired, the customer can use the manual
feed tray as the default paper-feed source:
User Tools> 1 System Settings> 1 General Features> 17 Feed Start
Method> Bypass

 Parts Catalogs
Aficio 240W
Roll Feeder Type 240 Interface PCB Type 240
Paper Cassette Type 240 Printer Controller RW-240
Table Type 240 Hard Disk Drive Type 240

 8 AJ03 0012 Cutter Unit 1
9 B641 2833 DC Motor:DC24V 7.18W 1
10 A571 7665 Screw - M2.6X5 1
11 B641 5766 Harness:Micro Switch 2
12 B641 2715 Stay:Guide Plate:Exit 1
13 B641 1450 Decal:Operate:Paper Holder

 .....................W480

 SC CODE DESCRIPTIONS 25 May, 2001
4-8
SC508: Cutter 1 home position error 1
Definition: B
Both left and right home position switches of the upper cutter were on just after
the main switch was turned on, or just after the upper feed tray was opened and
closed.
Possible Cause
• Right or left home position switch defective.
SC509: Cutter 1 home position error 2
Definition: B
No. Meaning
SC509-1 Left home position switch stays on 300 ms after the cutter
starts moving from left to right.
SC509-2 Right home position switch stays on 300 ms after the
cutter starts moving from right to left.
Possible Cause
• Cutter motor cable disconnected
• Cutter motor overload
• Motor defective
SC510: Cutter 1 home position

2013-04-09 

Availability In Stock: 5 Usually ships in: