• Eλληνικά
  • English
» Login
στείλτε VIBER τηλ.6944340728  Messenger   e-mail: 323582@gmail.com  
 
      
  
ζητήστε κωδικό
εισόδου
Ευχαριστούμε

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

SERVICE Sp problem Trouble arrow Sc Error +RESET problem arrow KM3035, C2500 error, paper tray

KM3035, C2500 error, paper tray

KM3035, C2500 error, paper tray
 
Price per Unit (τεμ.): Offer a price you like

 

2FD/2FF/2FG
1-5-28
Code Contents
Remarks
Causes Check procedures/corrective measures
C2000
C2500
C2600
C3100
Drive motor problem
• LOCK ALM signal remains high for 1
s, 1 s after the drive motor has turned
on.
Paper feed motor problem
• LOCK ALM signal remains high for 1
s, 1 s after the paper feed motor has
turned on.
Deck conveying motor*/desk drive
motor* problem
• No pulse is input within 500 ms of the
start-up.
• No pulse is input within 100 ms of the
previous pulse input.
Scanner carriage problem
• The home position is not correct
when the power is turned on or at the
start of copying using the bypass table.
Poor contact in
the drive motor
connector terminals.
Defective drive
motor rotation
control circuit.
Defective drive
transmission system.
Poor contact in
the paper feed
motor connector
terminals.
Defective paper
feed motor rotation
control circuit.
Defective drive
transmission system.
Defective deck
conveying motor
PCB/desk drive
motor PCB.
Deck conveying
motor /desk drive
motor does not
rotate correctly
(the motor is overloaded).
Poor contact in
the deck conveying
motor/desk
drive motor connector
terminals.
Poor contact in
the connector terminals.
Defective scanner
home position
switch.

Defective main
PCB or scanner
drive PCB.
Defective scanner
motor.
Reinsert the connector. Also check for continuity
within the connector cable. If none,
remedy or replace the cable.
Replace the drive motor.
Check if the rollers and gears rotate
smoothly. If not, grease the bushings and
gears. Check for broken gears and replace
if any.
Reinsert the connector. Also check for continuity
within the connector cable. If none,
remedy or replace the cable.
Replace the paper feed motor.
Check if the rollers and gears rotate
smoothly. If not, grease the bushings and
gears. Check for broken gears and replace
if any.
Replace the deck conveying motor PCB/
desk drive motor PCB and check for correct
operation.
Check the gears and remedy if necessary.
Reinsert the connector. Also check for continuity
within the connector cable. If none,
remedy or replace the cable.

 

2013-04-24 


Availability

In Stock: 1

Usually ships in:

on-order.gif


Last Updated: