Copy-star.com - Ζερβάκης Ν. Γεώργιος - Kyocera KM2050 DC2120 errors, KM2125 errors

στείλτε VIBER τηλ.6944340728 Messenger e-mail: 323582@gmail.com

ζητήστε κωδικό

εισόδου

Ευχαριστούμε

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

SERVICE Sp problem Trouble

Sc Error +RESET problem

DC2120 2125 1635 1650

Kyocera KM2050 DC2120 errors, KM2125 errors

Kyocera KM2050 DC2120 errors, KM2125 errors

Price per Unit (τεμ.): Offer a price you like

DC2120 errors, KM2050 errors

dc2216 if no prints check Usb less than 2meters !!!! or reset printer board sw1 to Left?????

parts >> 2120

Kyocera Mita/Copystar

				items
α/α	itm	P/n	Oem P/n	Περιγραφή Είδους - Item	qty	Rp	price	Prt
1
2
3		c0050		if a scanner board is set on a KM3530
4
5
6
7
8		c3100		C3100 Scanner carriage problem The home position is not correct when the power is turned on or copying the document placed on the contact glass. Poor contact of the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective scanner home position switch. Replace the scanner home position switch. Defective engine PCB. Replace the engine PCB and check for correct operation. Defective scanner motor. Replace the scanner motor.
9		c3200		optics
10
11
12
13		c4000		polygon Laser motor
14
15		c0410		ADF
16
17		c4010		C4010 Polygon motor steady-state problem The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the LSU. Defective engine PCB. Replace the engine PCB and check for correct operation.
18
19
20
21
22
23		c6000		C6000 Broken fixing heater wire The temperature does not become 100°C/212°F even if 30 s pass before secondary stabilization. When there is no 1°C/33.8°F rise in 5 s before secondary stabilization. Poor contact in the thermistor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Fixing thermistor installed incorrectly. Check and reinstall if necessary. Fixing thermostat triggered. Check for continuity. If none, replace the fixing thermostat. Fixing heater M or S installed incorrectly. Check and reinstall if necessary. Broken fixing heater M or S wire. Check for continuity. If none, replace the fixing heater M or S.
24		c6020		C6020 Abnormally high fixing unit thermistor temperature The fixing temperature exceeds 240°C/ 464°F for 40 ms. Shorted thermistor. Measure the resistance. If it is 0 Ω, replace the thermistor. Broken heater control circuit on the power supply PCB. Replace the power supply PCB and check for correct operation.
25		c6050		C6050 Abnormally low fixing unit thermistor temperature The fixing temperature remains below 90°C/194°F for 1 s. Poor contact in the thermistor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Broken fixing thermistor wire. Measure the resistance. If it is ∞ Ω, replace the fixing thermistor. Fixing thermistor installed incorrectly. Check and reinstall if necessary. Fixing thermostat triggered. Check for continuity. If none, replace the fixing thermostat. Fixing heater M or S installed incorrectly. Check and reinstall if necessary. Broken fixing heater M or S wire. Check for continuity.
26
27		6400		zero cross
28		6420		SHORT OR CUT SG 200mA in front, fuser
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49		.
50		.
51		.
52		.
53		.
54		.
55		B14.J-1442	55WA30010	BEARING - Developing Shaft Holder	6	23
56		.
57		.
58		.
59		.
60		.
61		.
62		.