• Eλληνικά
  • English
» Είσοδος
» Εγγραφή
Πληροφορίες: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

ΜΗΧΑΝΗΜΑΤΑ +PC +printers arrow ΠΡΟΣΦΟΡΕΣ Live! Main page arrow Kyocera fs2020dn Εκτυπωτής Δικτύου με Διπλή όψη used+10k free



Kyocera fs2020dn Εκτυπωτής Δικτύου με Διπλή όψη used+10k free
 
Τιμή Μονάδος (τεμ.): €890.00
€133.50
Έκπτωση: 85.00%

Kyocera fs-2020dn Δικτυακος Printer with Duplex 35cpm USED...

ετοιμος για 10.000 Α4 εκτυπωσεις!!! Με Εξυπνη Λειττουργία και σαν ΦΩΤΟΤΥΠΙΚΟ!!!

δειτε... Kyocera Mobile

( ειδικη τιμη δειγματος.... 170+φπα... διαθεσιμα ..και. τεμαχια-δειγματα)

FS-2020DN | Products | KYOCERA Document Solutions

επιλεγμενα +εγγυηση

περιεχεται  υλικο  για δωρεαν τα πρωτα 10.000Α4!!!

FS-2020DN

  • Up to 35 pages per minute in A4 with up to 1,200 dpi resolution
  • Standard duplex unit for double-sided printing
  • 100-sheet multi-purpose tray, 500-sheet universal cassette
  • Paper capacity of up to 1,100 sheets with optional paper feeder
  • PowerPC 440/533 MHz, 128–1,152 MB RAM
  • Network, USB and parallel connectivity as standard

  • Direct PDF Print from USB Flash memory device  ... Kyocera Mobile
  • Exceptionally low printing costs in its class : (Toner TK-340 for 12K ... 5%)

  • Preset IP Address : 192.168.1.80
  • Auto setup if connect with USB cable
  • driver : download from Kyocera site

FS-2020DN - Technical Specification| Products | KYOCERA ...

 ...............

Εκτυπωνει απο το κινητο σας,  η Tablet

...mobile print WiFi  ....ΑΣΥΡΜΑΤΑ
  •   .Kyocera MOBILE print app εκτυπωστε  κατευθειαν απο το κινητο η το tablet με WiFi  Mobile Print ....
  • εχετε Εκτυπωτη??  και κινητο  ?? βγαλτε φωτοτυπιες  !!!... δηλαδη βγαλτε φωτογραφια το εγγραφο/α... και στειλτε το για εκτυπωση !!!!  ... στον Kyocera Εκτυπωτη σας....
  • Αποφυγετε τους ιους των memory stick(στικάκια) και στειλτε αμεσα εκτυπωση με WiFi...
  • συνηθως συμβατα μοντελα(αυτα που εχουν μαυρο καπακι...)

...........

 

Kyocera PS159 - SEH Technology

www.seh-technology.com/.../kyocera-ps15...

The PS159 is a WLAN interface card for KYOCERA output devices with internal ... To provide for secure print data transmission in a wireless LAN (802.11b/g/n), ...

 ..............................Βοηθεια ......Help topics.......

 Striks and jams...check Fuser if hot roller is Burned...

paper jam.... take cassete out and check Lower green lever ... if paper stays in Duplex

drum error c7410... Drum unit ...is out...

error F25E... please check the one of two keys is pressed down? or Restart from main switch

ENVELOP MODE....please check at FUSER area, if 2 green keys are pressed Down...unpress

proccesing...   if a pdf is two high ...from internet

if error characters printing... change PCL XL driver...(PDL) ....to GDI + Pcl 5e

if only one job can printing...go to Device common ...Ram Disk... change to Off...

 

1150 Lift motor descent error <<προσοχη ...κατω απο το συρταρι...μην υπαρχουν...>>

*40/42 and 45/47 ppm printers (EUR/
USA model) only
Optional bulk paper feeder’s tray bottom
position sensor does not turn on.
Lift motor lock error occurred 3 times.
Defective bulk
paper feeder’s tray
bottom position
sensor.
Replace the bulk paper feeder’s tray bottom
position sensor.
Defective harness
between bulk
paper feeder’s tray
bottom position
sensor and main
PWB (YC8), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness. (Refer to
bulk paper feeder’s service manual)
Defective bulk
paper feeder’s
main PWB.
Replace the bulk paper feeder’s main PWB.
(Refer to bulk paper feeder’s service manual)


2000 Main motor error
MMOTRDYN signal does not go low
within 2 s after MMOTONN signal goes
low.
Defective harness
between main
motor and engine
PWB (YC501), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective main
motor drive transmission
system.
Check if the rollers and gears rotate
smoothly. If not, grease the bushings and
gears. Check for broken gears and replace if
any.
Defective main
motor.
Replace the main motor.
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
2200 Drum motor error
DMOTRDYN signal does not go low
within 2 s after DMOTONN signal goes
low.
Defective harness
between drum
motor and engine
PWB (YC11), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective drum
motor drive
transmission
system.
Check if the gears rotate smoothly. If not,
grease the bushings and gears. Check for
broken gears and replace if any.
Defective drum
motor.
Replace the drum motor.
Defective engine
PWB.
Replace

............

 4000 Polygon motor (laser scanner unit)
error
POLRDYN signal does not go low within
10 s after POLONN signal goes low.
Defective harness
between polygon
motor and main
PWB (YC11), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective harness
between main PWB
(YC12) and engine
PWB (YC12), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective laser
scanner unit.
Replace the laser scanner unit (See page
P.1-5-38).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
Defective main
PWB.
Replace the main PWB (See page P.1-5-
25).
4200 Laser output (pin photo sensor) error
The pin photo signal (PDN) is not output
within a specified time after the polygon
motor ready signal (POLRDYN)
becomes ready (L level).
Defective harness
between PD PWB
(YC1) and main
PWB (YC16), or
improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective APC
PWB.
Replace the laser scanner unit (See page
P.1-5-38).
Defective PD
PWB.
Replace the laser scanner unit (See page
P.1-5-38).
Defective main
PWB.
Replace the main PWB (See page P.1-5-
30).
5100 Short-circuited main charger output
Five pages have been printed with the
main charger output short-circuited.
Drum unit installed
incorrectly.
Verify harness is not pinched in the drum
unit.
Engine PWB
installed incorrectly.
Verify harness is not pinched in the engine
PWB.
Defective engine
PWB.
Replace the

...........

 6000 Broken fuser heater lamp wire
The temperature does not reach 100°C/
212°F after the fuser heater lamp has
been turned on continuously for 30 s.
35/37 ppm printer (EUR/USA model):
The temperature does not rise by 1°C/
1.8°F after the fuser heater lamp has
been turned on continuously for 5 s during
printing.
40/42 and 45/47 ppm printers (EUR/USA
model):
The temperature does not rise by 1°C/
1.8°F after the fuser heater lamp has
been turned on continuously for 10 s
during warm-up or at standby.
Poor contact in the
fuser thermistor 1
connector terminals.
Reinsert the connector (See page P.1-5-21).
Fuser thermistor 1
installed incorrectly.
Check and reinstall if necessary (See page
P.1-5-21).
Thermal cutout
triggered.
Check for continuity. If none, replace the
thermal cutout (See page P.1-5-21).
Fuser heater lamp
installed incorrectly.
Check and reinstall if necessary (See page
P.1-5-21).
Broken fuser
heater lamp wire.
Check for continuity. If none, replace the
fuser heater lamp (See page P.1-5-16).
6020 Abnormally high fuser thermistor 2
temperature
The temperature of the fuser thermistor
2 detects 240°C/464°F or more continuously
for 3 s.
Shorted fuser thermistor
2.
Measure the resistance. If it is 0 Ω, replace
the fuser thermistor 2 (See page P.1-5-21).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
6030 Broken fuser thermistor 2 wire
Input from fuser thermistor 2 is less than
1 (A/D value) for more than 1 s.
Poor contact in the
fuser thermistor 2
connector terminals.
Reinsert the connector (See page P.1-5-21).
Broken fuser thermistor
2 wire.
Measure the resistance. If it is ∞ Ω, replace
the fuser thermistor 2 (See page P.1-5-21).
Fuser thermistor 2
installed incorrectly.
Check and reinstall if necessary (See page
P.1-5-21).
Thermal cutout
triggered.
Check for continuity. If none, replace the
thermal cutout (See page P.1-5-21).
Fuser heater lamp
installed incorrectly.
Check and reinstall if necessary (See page
P.1-5-16).
Broken fuser
heater lamp wire.
Check for continuity. If none, replace the
fuser heater lamp (See page P.1-5-16).
6120 Abnormally high fuser thermistor 1
temperature
The temperature of the fuser thermistor
1 detects 240°C/464°F or more continuously
for 3 s.
Shorted fuser thermistor
1.
Measure the resistance. If it is 0 Ω, replace
the fuser thermistor 1 (See page P.1-5-21).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
6130 Broken fuser thermistor 1 wire
Input from fuser thermistor 1 is less than
1 (A/D value) for more than 1 s.
Poor contact in the
fuser thermistor 1
connector terminals.
Reinsert the connector (See page P.1-5-21).
Broken fuser thermistor
1 wire.
Measure the resistance. If it is ∞ Ω, replace
the fuser thermistor 1 (See page P.1-5-21).
Fuser thermistor 1
installed incorrectly.
Check and reinstall

.............

 2J0/2J1/2J2
1-4-7
6220 Abnormally high fuser thermistor 3
temperature
The temperature of the fuser thermistor
3 detects 250°C/482°F or more continuously
for 3 s.
Shorted fuser thermistor
3.
Measure the resistance. If it is 0 Ω, replace
the fuser thermistor 3 (See page P.1-5-21).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
6230 Broken fuser thermistor 3 wire
Input from fuser thermistor 3 is less than
1 (A/D value) for more than 1 s.
Poor contact in the
fuser thermistor 3
connector terminals.
Reinsert the connector (See page P.1-5-21).
Broken fuser thermistor
3 wire.
Measure the resistance. If it is ∞ Ω, replace
the fuser thermistor 3 (See page P.1-5-21).
Fuser thermistor 3
installed incorrectly.
Check and reinstall if necessary (See page
P.1-5-21).
6400 Zero cross signal error
The ZCROSS signal does not reach the
engine PWB for more than 2 s.
Defective harness
between connect-L
PWB (YC8) and
engine PWB (YC3),
or improper connector
insertion.
Reinsert the connector. Also check for continuity
within the connector harness. If none,
remedy or replace the harness.
Defective connection
between
power source unit
(YC103) and connect-
L PWB (YC1).
Reinsert the connector.
Defective power
source unit.
Replace the power source unit (See page
P.1-5-38).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
7000 Toner motor lock error
A motor over-current signal is detected
continuously for 5 seconds since the
toner motor is activated.
Lump of toner
inside toner container.
Replace the toner container.
Defective toner
replenishment
drive system.
Replace the developing unit (See page P.1-
5-10).
Defective toner
motor.
Replace the developing unit (See page P.1-
5-10).
Defective engine
PWB.
Replace the engine PWB (See page P.1-5-
25).
7410 Drum unit non- installing error
The drum unit is not installed or not
installed properly.
The drum PWB EEPROM does not communicate
normally.
The drum unit is
not installed.
Install the drum unit (See page P.1-5-11).
Defective connection
drum PWB
(YC1) and connect-
L PWB (YC3).
Check the connection of connectors drum
PWB (YC1) and connect-L PWB (YC3).
(See page P.1-4-10, refer to figure 1-4-5)
Defective drum
PWB EEPROM.
Replace the drum unit (See page P.1-5-11).
Defective engine
PWB.
Replace

2015-12-18 


Διαθεσιμότητα

Σε Απόθεμα: 19

Αποστέλεται σε :

on-order.gif

 


Τελευταία ανανέωση: