System Error:

0B0006

Problem

Description:

The Trailing Cable has been incorrectly connected OR the fuse in

the Electronics Module has been burned.

Corrective Action:

WARNING

Turn the Printer OFF and disconnect the trailing cable. Check that the ends of the Trailing Cable are flat and are not damaged or bent.

Reconnect the Trailing Cable correctly, making sure it is pushed in

firmly (Refer to the instructions on Page 8-39).

Power ON Printer and check if the Error Code disappears. If the Error Code

continues, replace the Electronics Module, MAIN PCA= C6071-60001   (Refer to the instructions

on Page 8-25)making sure you take care when you reconnect the trailing cable.

PLEASE TAKE CARE WHEN CONNECTING THE TRAILING CABLE TO THE ELECTRONICS MODULE. INCORRECT INSTALLATION WILL BURN THE FUSE IN

THE ELECTRONICS MODULE, CAUSING THE COMPLETE

REPLACEMENT OF THE ELECTRONICS MODULE.

  (1)

2016-07-27