• Eλληνικά
  • English
» Login
στείλτε VIBER τηλ.6944340728  Messenger   e-mail: 323582@gmail.com  
 
      
  
ζητήστε κωδικό
εισόδου
Ευχαριστούμε

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

SERVICE Sp problem Trouble arrow Sc Error +RESET problem arrow c250 c252 cs171 cs172 arrow SCAN TO SMB, OS MAC



SCAN TO SMB, OS MAC
 
Price per Unit (τεμ.): Offer a price you like

SCAN TO SMB, OS MAC

 setup an SMB on W10 Network scanner (Unpublished)

  for Kyocera 400ci... try this

  1. πρωτα βαλτε σταθερη-Static IP στο PC σας(τοπικη συνδεση...)  πχ. 192.168.1.18
  2. φτιαξτε κοινοχρηστο φακελο στο  C:\      πχ. C:\SMB18
  3. δειτε το ονομα του PC,  απο Εναρξη Υπολογιστης δεξι κλικ ... πχ GIORGOS
  4. απο Πινακα ελεγχου, βαλτε κωδικο Εισοδου χρηστη PC, πχ.  a
  5. ανοιξτε Browser στο 192.168.1.90 και προσθεστε νεο φακελο SMB18 με τα παραπανω στοιχεια... καντε τεστ σαρωσης....οκ
  6.    η μπορειτε να προσθεσετε εξαιρεση για την διευθυνση του σκανερ σας...
  7.    πρεπει να τρεχει δεξια κατω στην γραμμη εκκινησης το FTP Utility...

............................

Για να φτιαξετε σωστα ενα Κοινοχρηστο  SMB φακελο(στα W10)... Προσεξτε τα πιο κατω...

 Πίνακας Ελέγχου\Όλα τα στοιχεία του Πίνακα Ελέγχου\Κέντρο δικτύου και κοινής χρήσης\Ρυθμίσεις κοινής χρήσης για προχωρημένους... στο κατω μερος της σελιδας, Ολα τα Δικτυα, και παλι στο κατω μερος, δειτε και τσεκαρετε... Ενεργοποιηση της κοινης χρησης με προστασια κωδικο προσβασης..(και κρυπτογραφιση 40bit και οχι στα 128bit)

 .......

 ... Network scanner test, ελεγχος δικτυακου σαρωτη... ... Network scanner test, ελεγχος δικτυακου σαρωτη...

 

 

..............

γεια σας,

How to scan to a Mac from a bizhub

img

On a recent installation we had to set up the a new Konica Minolta bizhub 364e to scan to a number of Macs running the Mavericks OS.  After some research on the web we found a solutions to this which currently is the only way to set this up.   Here are the instructions below:

1.  You must use Scan to FTP and NOT scan to SMB.  Even though the Mac has “Scan to SMB” under the Sharing option this does not work with the bizhub.

2.  On each Mac that you want to scan to you must enable the FTP service.  This is done by launching Terminal and entering a single command to launch the FTP service that comes standard on all Maverick installs.  The command to enter into Terminal is: sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist (only the portion in red)

3.  Enter the password of the user on the computer.

4.  Close Terminal.  The FTP service should now be running.

5.  Create a folder that you want to scan too and note down its exact path by right clicking on the folder and selecting “Get Info”.  The path will be presented here.

6.  Using a web browser remote into the bizhub by typing its IP address in the browser address bar.

7.  Select the “Store Address” —> “New Registration” —> “FTP”

8.  Enter the IP Address of the Mac in the “Host Address” Field.  No slashes just the address.

9.  Enter the path to the file exactly as your found it in #5 above.  It must have the slashes.

10.  Enter the User ID of the Mac.  If it show Bob Jones it would then be entered as “bobjones”

11.  Enter the password to the Mac in the password field and the save this.

This should work and has been tested a few times by BOSS.  One important note is to ensure that the Mac is set to a Static IP Address so that when the user shuts it down they do not change the IP and thus break the scanning path from the bizhub.

These instructions were created using the latest Konica Minolta bizhub product line with info-palette.

....
The printer seems to support mac, and I downloaded the drivers from:

http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=c250


I installed the drivers you cited and created a dummy printer. The options you want are there--just not in the usual places. In a print window use the pop up menu to look for the various categories of options. For Duplex, look under the Finishing. You will find a check box for Duplex. For Color/Grayscale, use Quality -> Select Color.

I think you will find all the options you need in the print window. You will just have to explore all the various option categories until you find the choices you want.
..............

Specifying the Color and Image Quality



.......
\"\"
....
The printer seems to support mac, and I downloaded the drivers from:

http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=c250


I installed the drivers you cited and created a dummy printer. The options you want are there--just not in the usual places. In a print window use the pop up menu to look for the various categories of options. For Duplex, look under the Finishing. You will find a check box for Duplex. For Color/Grayscale, use Quality -> Select Color.

I think you will find all the options you need in the print window. You will just have to explore all the various option categories until you find the choices you want.
..............

Specifying the Color and Image Quality

 
23 Μαρ (Πριν από 9 ημέρες)
  
 

2017-04-01 


Availability

In Stock: 3

Usually ships in:

2-3d.gif


Last Updated: