|
HP DesignJet T520 error 53.2:10 HP DnJ 500 INK SUPPLY STATION DNJ-500/800/815 C7769-60373 Genuine +new!................. sometimes.... prices become crazy.... up or down... oil the left roll and go... till the next call Se manu Description Output Tray sensor failure. Main PCA, Output tray Remedy Remote troubleshooting (call agent) 1. Switch off the printer, and disconnect the power cord. Reconnect the power cord and power on the printer. 2. The call agent asks the customer to go to Support Menu by pressing the Power key continuously for 15 seconds. 3. Go to Diagnostics menu and run 2.6 Output Tray Sensor diagnostic, see 2.6 Output Tray Sensor. 4. The call agent should send to the customer the Output Tray Sensor, which is a CSR part. • Output Tray Sensor Assembly • CQ890-90015 NOTE: If, after the customer repair, the issue still continues, we recommend sending an onsite engineer with Cables Kit and Output Tray Sensor PCA. Follow the steps below on onsite troubleshooting. • Cables Sk • CQ890-67021 • Output Tray Sensor PCA • CQ890-90015. 5. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.
Onsite troubleshooting and solution (service engineer) 1. Go to the Support Menu (see Entering the support menus) and run 2.6 Output Tray Sensor diagnostic, see 2.6 Output Tray Sensor. Check that the Output Tray is not damaged. 2. If the Output Tray is OK and the problem continues then replace the Output Tray Sensor PCA. • Output Tray Sensor PCA • CQ890-90015 3. Remove the covers and check that the cable of the Output Tray Sensor is connected to the Main PCA and is not damaged. If the cable is not connected then reconnect it, and power on the printer again to check whether the system error has disappeared. Important note: If the cable is damaged then order a Cable Service Kit (add part number and name of Cable Service Kit) and change the Output Tray sensor cable: see Output Tray Extender Sensor Cable. • Output Tray Sensor Assembly • CQ890-90015 4. Replace the Main PCA, see Main PCA. • Main PCA Pro • CQ890-67023 • Main PCA Basic • CQ891-67003 This manual is for the service and repair of these HP Plotter models: HP Designjet T120 Basic Printer 24 inch CQ891A
HP Designjet T520 Pro Printer 24 inch CQ890A
HP Designjet T520 Pro Printer 36 inch CQ893A
https://printcopy.info/?...HP...DesignJet%20T520...53.2:... Code. 53.2:10. Description. Output Tray sensor failure. Main PCA, Output tray. Remedy. Remote troubleshooting (call agent) 1. Switch off the printer, and ... printer failure inksystem 2019-07-23
https://printcopy.info/?...HP...DesignJet%20T520... Code. 21:10. Description. Service Station does not work properly or communication lost. Bundle PCA. Remedy. Remote troubleshooting (call agent) 1. Switch ... HP DesignJet T520. August 6, 2018 /0 Comments/in ... To troubleshoot this error, see The Front Panel is blank (the printer does not start). 3. ..... Code: 53.2:10 HP Designjet T120 Basic Printer 24 inch ... HP Designjet T520 Pro Printer 24 inch ...... 53.2:10. Output Tray sensor failure. 55:10. Line Sensor failure. 59.1:19. 24 Νοε 2013 - Hi, I finally got my HP T520 36 inch printer delivered on Friday and after one print, as I was loading a roll of paper into the roll feed, I - 5054026.Δεν υπάρχουν: 53.2:10 This document is for the HP Designjet T120 and T520 ePrinter series. ... when paper is loaded. Printer may also display an error 53.1:10 (OOP sensor failure).Δεν υπάρχουν: 53.2:10 O erro mais comum que a HP Designjet T120, T520 e T730 costumam a dar, é o ... 45:10, 51:10, 51.1:10, 53.1:10, 53.2:10, 55:10, 59.1:19, 59.2:19, 79:03, 79:04, ... DESIGNJET T120/T520 eprinter Series Service Manual iv Notices ENWW Using ... Sensor failure 53.1:10 OOP sensor failure 53.2:10 Output Tray sensor failure ... 2019-07-23
|
Availability
In Stock: 1
Usually ships in:
|
|
HP DesignJet T520 error 53.2:10 
