Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.
Προϊόντα με Μάρκα+Model 
KONICA MINOLTA, Kyocera +Hp C203 C253 Konica Minolta c360 error c2152 c224 CRAZY THING...
|
|
|
CRAZY THING... Got a strange one....
Bizhub C360 with a C2152 error on it. I replaced Main drive assy(houses PS39,cl5,m1) and transfer belt last Wednesday. Code came back about 24hrs later on Thursday. I swapped out PRCB being the last part listed as abnormal in service manual. Machine worked for another 24hrs or so and error came back. I took machine back to shop for observation over the weekend. It worked fine both saturday and sunday. I copied and printed a few hundred pages to it both days(about equivalent to how much they do). Brought the machine back to them Monday morning. It worked fine for about another 24hrs and the code returned on Tuesday. I brought machine back into shop and replaced Power supply on machine. I then returned the machine to them and told them to move machine to a different location, because I was suspecting faulty power. They did so. BUT......the next day the code came back. I was unable to clear at customers site, so I brought machine back into shop and the code cleared here. I gave them a brand new C360 to use for the time being while I monitor their machine in shop. I'm still leaning towards a power issue in their building, until the code appeared in my shop, when I sent a print job to it.
This is where I am at now. They have a loaner C360 installed yesterday. And I have their C360 which has the C2152 error on it once again that will not reset.
Anyboday got any ideas?
Firmware is at the newest level .... PIKRAAAA... Re: Bizhub C360 w/C2152 error To confirm a power quality diagnosis you'll need to install a power quality analyzer, and leave it on-line for 48 hours. The better ones record specific power quality events, whether its a sag or a surge, and how much of one. I had three Kyocera FalconIII machines that were dropping off the network randomly, then would come back on and print the documents in the queue. I found surges exceeding 250vac, usually at 6:00 am and 3:30 pm.
When the power was cleaned up, there weren't any more problems. =^..^= Re: Bizhub C360 w/C2152 error Here's something that may be of interest, take a look at the attached file. I can't access my 360 manual here and MKM.com isn't letting me download the manual but here's some other stuff to check
If you cannot get the machine error to clear at all try this...
1. Power the machine ON with the main power switch while holding the Utility key.
2. Release the Utility key when Konica Minolta is displayed.
3. Wait for the Trouble Reset icon to appear and then press the icon.
4. Power the machine OFF and ON using the main power switch.
Here's some things to check for proper operation as well...
1. PC12 has failed.
2. M11 (First transfer pressure retraction motor) has failed.
3. Check the bypass area, I recall problems with wires in that area getting pinched in covers Re: Bizhub C360 w/C2152 error Think I might have got it.....
it would appear that the CL5 and PS39 failed again. I replaced them and the code cleared. Now just gotta play the waiting game to see if it will hold! Thanks for the input everyone.....Still gonna throw a power monitor on their line once I get it.... ....... Did you read the post? People pointed at ICP3 and/or controller board Re: bizhub C224 has C2152 error code yes, I have read the whole post but unfortunately I forgot to ask for the value of the ICP3.
How many amperes or milliamperes must have a new ICP? Re: bizhub C224 has C2152 error code none. you check for continuity. its a fuse. ohms not voltage. Re: bizhub C224 has C2152 error code had something similar on a c454 and it was in the fuser drive section with the clutch cl5 that drives the transfer belt, you will have to take the assembly out and inspect for worn items. it is a pain to take out.
2020-03-25 bizhub C224 has C2152 error code Cannot figure this out. The fuser motor turns when the machine powers up. I have checked sensor PS39 and I get a change of state when it is interrupted. I have tried another transfer unit and the code still comes up. I am not that experienced with Konicas so the book maybe saying something I do not understand. I need to get the machine working again. I would be very thankful for any help. Re: bizhub C224 has C2152 error code Hello at all,
yesterday I had the same code. Replacing with a new belt didn't succeed, after cleaning PS39 the malfunction still appeared! 2020-03-25 Re: PRT/IR Error L-1 L2 L-3 end users should not monkey around with programming or firmware updating. Go buy service from a qualified Tech. Parts need to be replaced for a reason. go to IU lifenon stop STOP O C
2021-06-05
|
Availability
This product is currently not available.
Usually ships in:
|
|
Last Updated: 
