• Designjet 800 error | designjet error codes | severe error | designjet service | 800ps repair | designjet 800 error code

If your HP Designjet 500 plotter is giving you a error message please contact us for a free phone diagnostics. We can trouble shoot any Designjet error code and will provide you with a free quote for the parts needed to get your Designjet 500 running fast.

•  Error  Processing  - Flushing rest of job.

• • hp dnj 500 pcl3 solution VIEW in only 0.05@
• • OK pcl3 in 510plus with card. see these... Dnj 500 PCL3GUI 64-bit 6.08 2.4 MB Nov 14, 2012,  and HP Dnj 500 and 510 HP-GL/2 and HP RTL 64-bit driver 7.10 2.8 MB Nov 14, 2012 ...ok

    ---

• 
  

  01.10 electronics module error hp-GL,  Main Pca or short circuit, cables etc

System Error: 01:13 -  Electronics Module failure

System Error: 02:10 -  Carriage failure  test moving with Upp+Enter +ON...

System Error: 02:13 - Carriage failure

System Error: 03:10 - Power Supply failure  

System Error: 04:11 LAN - Card not detected

System Error: 05:10 Warning - Formatter not detected, electronics module error hp-GL(500ps)

 -take it out and set the PCL3 Driver,  HP Dnj 500 driver W8.1 for W10 wAutocad 2018 0.12pap

System Error: 05:10 Error - Formatter failure electronics module error hp-GL(500ps) -take it out and set the PCL3 Driver

System Error: 05:11 - Formatter Not Detected

System Error: 08:11 - Front Panel Not Detected

System Error: 11:11 - Trailing Cable Badly Connected, or need a new cables set...

System Error: 11:13 - Problem with setting the voltage of the Printheads

System Error: 12:11 - A short detected in the Carriage Assembly

System Error: 21:10 - Service Station failure, or broken cup in servStation, moving impossible, interconnect cable check after set a new belt...

foam or connector, carriage cables...., or full

System Error: 21:11 - Service Station cannot be detected or the Service Station is badly adjusted, conn.

System Error: 22:10 - Ink Supply Station failure   test with service mode

System Error: 41:10 -  Paper-Axis Motor failure   test with service mode

System Error: 41:13 - Error in the Paper-Axis Motor Encoder quadrature

System Error: 42:10 - Scan-Axis Motor failure      test with service mode

System Error: 43:10 - Vacuum Fan failure

System Error: 43:11 - Vacuum Fan not detected

System Error: 56:10 - Drive Roller Encoder Sensor error    clean or replace ps or disk

System Error: 56:13 - Error in the Drive Roller Encoder Sensor quadrature.

System Error: 61:04 - Firmware Error 

System Error: 61:05 - Error Processing Job. This Error Code only appears in HP DesignJets 800

Series, or in the HP DesignJet 500 and 510 Series with an HPGL/2 card installed,

when processing either a PostScript or HP-GL/2  file

System Error: 64:04 - Firmware Error (USB Port) 

System Error: 71:04 - Problem allocating Memory. This Error Code only appears in

HP DesignJets 800 Series, or in the HP DesignJet 500 and 510 Series with an HP-GL/2 card installed.

System Error: 71:06 - Out of Memory problem hp500plus w hpGL 160mb Ram, w7 64bit, Drawing Out of memory Data lost but prints continous pdf's

System Error: 72:04 - Problem in the Scan-Axis (Firmware Error)

System Error: 73:04 - Servo Error

.........78:04 - tsurak joh

System Error: 79:04 - Firmware Error, check Ink supplies or PrintHeads, cables

System Error: 81:01 - Paper-Axis shutdown, Motor...or Encoder sensor  test with service mode

System Error: 81:11 - Paper-Axis shutdown (during the Paper Advance test)

System Error: 85:10 - Paper-Axis Encoder error. The Drive Roller Encoder Sensor cannot find the zero position of the Encoder Disk

System Error: 86:01 - Carriage-Axis shutdown, Belt, or broken ink tubes assy, moving faulty...

                    clean - check Enconder Strip if it is.....  broken carriage , or Service station parts...

System Error: 86:11 - Carriage-Axis shutdown, moving faulty...

System Error: 86:13 - Carriage-Axis shutdown (Firmware Error)

System Error: 87:13 - Unable to read the Carriage Encoder Sensor

System Error: 93:10 - Ink System startup failed

Tags:

HP designjet 800ps | Refurbished HP designjet 800ps | designjet 800ps large format | wide format 800ps | Designjet 800ps plotter parts | Designjet 800 800Ps 5:10 error

Re: HP Designjet 800ps - error code 11:11 on start-up

12-08-2010 08:18 AM

201@

• HP Designjet 500 24-in Roll Printer
• HP Designjet 500 42-in Roll Printer
• HP Designjet 500 Plus 24-in Roll Printer
• HP Designjet 500 Plus 42-in Roll Printer
• HP Designjet 500ps 24-in Roll Printer
• HP Designjet 500ps 42-in Roll Printer
• HP Designjet 500ps plus 24-in Printer
• HP Designjet 500ps plus 42-in Printer

HP DesignJet 500 24-in Roll Printer Driver

Prior to installation, you should check the specifications used device that includes the type of printer and operating system that is used on your Pc and laptop.
If you have any questions, complaints and suggestions. Please let us know at admin@printerdriverseries.com

2017.09