Konica c252 error c2151, c2152, Bzh c451
......... FOR c252 ...M3 === p39 item12 9J06 M103 00 MOTOR
C2151 2nd Image Transfer Roller
Separation
• The 2nd Image Transfer Pressure Position Sensor
doesn’t turn ON (Retracting) even after the lapse
of a given period of time after the 2nd Image
Transfer Pressure/Retraction Motor has started
rotating during the 2nd Image Transfer Roller is
retracting.
• The 2nd Image Transfer Pressure Position Sensor
doesn’t turn OFF (Pressuring) even after the
lapse of a given period of time after the 2nd
Image Transfer Pressure/Retraction Motor has
started rotating during the 2nd Image Transfer
Roller is pressuring.
B
C2152 Transfer Belt Separation • The 1st Image Transfer .....this gor c252
c2152 c250 908# FUSER LOCKED by damaged Press roller also 3.02 marin p
Konica c252 error c2151, c2152, Bzh c451
...........
2nd Image Transfer Roller Separation
• The 2nd Image Transfer Pressure Position Sensor doesn’t turn ON (Retracting) even after the
lapse of a given period of time after the 2nd Image Transfer Pressure/Retraction
Motor has started rotating during the 2nd Image Transfer Roller is retracting.
• The 2nd Image Transfer Pressure Position Sensor doesn’t turn OFF (Pressuring)
even after the lapse of a given period of time after the 2nd Image Transfer
Pressure/Retraction Motor has started rotating during the 2nd Image Transfer Roller is pressuring.
1 Check the connector of motor for proper connection and correct as necessary. 2 Change the Right Door Assy. 3 Change PWB-M.
........................
C451 Error C2151
I have a machine that throws up C2151 at start up
ive checked that the pressure sensor and motor work
no other related faults or codes
can anyone help am i missing something
Thanks Re: C451 Error C2151
replaced PRCB and DCPU still get same code
does anyone have a schematic for a C451 Re: C451 Error C2151
To correct, the following actions may need to be taken:
a. Replace the Transfer roller (p/n A00J R715 00).
b. Check PS50 (Pressure Welding Alienation Sensor) and replace if necessary (p/n 9335 1300 61).
c. Replace M3, 2nd Image Transfer Pressure Retraction Motor (p/n 4037 R709 00).
d. Replace PRCB, Printer Control Board (p/n A00J H001 06).
e. Replace DCPU, DC Power Supply (p/n A00J M404 05). Re: C451 Error C2151
Thanks for the reply
I have removed all the items you listed and tested them in another machine
they all work fine
think i must have a broken wire somewhere
Re: C451 Error C2151
Got it
found a fractured wire between the prcb and m3 motor
if i moved the wire i could get signal at the motor
move it again and signal was lost
replaced wire problem fixed
................................
c252
1 4038 3517 02 REINFORCE PLATE D 1 a-9735 0306 14
b-9646 0306 14
c-9735 0308 14
2 4038 R730 00 DEVELOP DRIVE ASSY C 1
3 4038 M101 00 MOTOR B 2
4 9314 2300 61 MOTOR B 1
5 4038 R729 00 HOPPER DRIVE ASSY
.............
c300. c352
Key Part No. Description Destinations Class QTY Standard parts
1 4038 3517 02 REINFORCE PLATE D 1 a-9735 0306 14
b-9646 0306 14
c-9735 0308 14
2 9J06 R710 00 DRIVE ASSY C 1
3 9314 2500 11 MOTOR B 2
4 9314 2300 12 MOTOR B 1
..............
2015-02-24